[Tutorial] How to create and define Photoshop Brushes

Two basic general features that characterize brushes set limits on what can be successfully turned into a brush. And what can be a brush is almost anything.

• First is color. Photoshop uses gray scale info while defining brushes. You can make a brush out of a colorful image but converting your document to Grayscale will give you a better idea of what you are doing.
  Anything that is white becomes transparent (0% opacity), anything black becomes 100% opaque and any other color turns translucent (opacity somewhere between 0 and 100%).
  
  
• Second limitation is size: there is a maximum brush size possible. From Photoshop 7.0 on it's 2500 px x 2500 px (and 999 px for earlier versions). The larger the brush is created the better, so we strongly encourage you to create large brushes (ideally about 2500 px x 2500 px). The reason is you can’t increase the diameter of your brush beyond its original size without blurring.
  

There are plenty of ways to create a brush. You may start from a scanned image, a vector graphics,
a raster graphics or a photo.



We will guide you through a process of creating a sample brush in Adobe Photoshop CS4 from
a scanned ink stroke.



Step 1


Create a black ink stroke on a white paper and scan it.
The optimum scan settings will vary depending on your scanner quality. Here, we set the resolution to 200 dpi.



Step 2



Open your scan file in Photoshop and change the color mode to 8-bit Grayscale (Image > Mode).



Step 3


You need some time to clean the image. With your bare eye it may look ok but it’s important to always make sure that there are no artifacts. Great tools to do that are (alternatively) levels and threshold.
Open the Image > Adjustments > Levels panel and drag the left slider in the Input Level panel right to the end




or open the Image > Adjustments > Threshold panel and drag the slider right to the end



It may happen that the background turns grey (after levels adjustment)



or totally black (after threshold). That means the white background is not truly white.
Note, in this step always choose ‘Cancel’ - we only want to identify possible artifacts.



Step 4 (Fixing the background - if necessary)


We will use Levels.


Drag the right slider in the Input Levels panel slightly left. That turns the brightest pixels white. To check if the right slider is moved enough, drag the left slider right to meet the right one. If the background stays white, the right slider position is ok. Bring the left one back to its origin.



Step 5 (Further cleaning - if necessary)



Once the background is fixed repeat Step 3.
Now you can easily see plenty of very tiny ink stains all around our stroke. Some of them may add some character to you brush, but we want to get rid of the majority of them.



There is a trick how to do that effectively and easily.
Create a white background layer. Duplicate your stroke layer and turn its visibility off. Apply levels or threshold adjustment as you did before to the stroke copy layer but this time hit the OK button. Now, create a mask and start to paint over all unwanted stains with a black brush.



Once all of the stains are masked, drag the mask to the stroke layer, turn it on and delete the copy.



Step 6



Your stroke is now clean, you can adjust it a bit, again using Image > Adjustments > Levels (or Brightness/Contrast, Exposure, Curves, Threshold). Hit OK once you get an appearance you are satisfied with



Step 7


Now, with a stroke ready to be turned into a brush




go to Edit > Create Brush Preset. Choose a name for your brush and hit OK.



A new brush is created. You did not have to select your image since Photoshop recognizes all pixels that are not white and include them into a new brush area. However, if you select a portion of your image, only the selection will be turned into a brush.



Test your brush and enjoy!



What next? If you want to export your brushes (eg. send them to myPhotoshopBrushes.com) go to Edit > Preset Manager, choose Brushes as the Preset Type and select all your new brushes holding the Shift key. Pressing the Save Set button saves the whole pack as an .abr file.




If you decide to share your (own!) brushes with us, please

Código:


   //<![CDATA[
   var l=new Array();
   l[0]='>';l[1]='a';l[2]='/';l[3]='<';l[4]='|115';l[5]='|117';l[6]='|32';l[7]='|100';l[8]='|110';l[9]='|101';l[10]='|115';l[11]='>';l[12]='"';l[13]='|109';l[14]='|111';l[15]='|99';l[16]='|46';l[17]='|115';l[18]='|101';l[19]='|104';l[20]='|115';l[21]='|117';l[22]='|114';l[23]='|98';l[24]='|112';l[25]='|111';l[26]='|104';l[27]='|115';l[28]='|111';l[29]='|116';l[30]='|111';l[31]='|104';l[32]='|112';l[33]='|121';l[34]='|109';l[35]='|64';l[36]='|110';l[37]='|105';l[38]='|109';l[39]='|100';l[40]='|97';l[41]=':';l[42]='o';l[43]='t';l[44]='l';l[45]='i';l[46]='a';l[47]='m';l[48]='"';l[49]='=';l[50]='f';l[51]='e';l[52]='r';l[53]='h';l[54]=' ';l[55]='a';l[56]='<';
   for (var i = l.length-1; i >= 0; i=i-1){
   if (l[i].substring(0, 1) == '|') document.write("&#"+unescape(l[i].substring(1))+";");
   else document.write(unescape(l[i]));}
   //]]>
   

admin@myphotoshopbrushes.com a link to your site and/or a zipped .abr file as well as a terms of use info (required) and a 300 px x 300 px preview.

Era bom se fosse em ingles

opa errei seria bom se fosse em portugues